inter-tech SC-4100 mini server-chassis with Backplane / mini ITX

inter-tech SC-4100 mini server-chassis with Backplane / mini ITX

SKU: 7026
Manufacturers: inter-tech

This very compact mini-server- / NAS- chassis by inter-tech is a good foundation for the assembly of a microserver or a dedicated NAS system. By request we configure this chassis already with a perfectly compatible high-quality 200W or 250W flex-ATX power-supply by Enhance.

from

€ 85,00

incl. 19% VAT , plus Tax-zone / delivery-country:

Currently out of stock

With the SC-4100 inter-tech aims at the sparsely populated region of highly specialized and highly compact mini ITX server-chassis, where only few manufacturers can be found. The chassis is very well manufactured and provides space for the installation of up to four 3,5" harddisks in the backplane-module on the front-panel. The slide-in modules of the backplane can alternatively be equipped with 2,5" harddisks or SSD´s, as there are holes for this format, too.

Ventilation of the chassis is provided by a pre-installed 80mm fan on the rear. Optionally, a 40mm fan can be installed on the front-side of the chassis. Power-supplies with flex-ATX or 1U form-factor can be used to supply the system with power - the back-plate is compatible with both formats. Apart from the mini ITX mainboard, the chassis can accomodate one full-height expansion card. Two USB 3.0 ports on the front-plate and behind the lockable front-cover ensure good speeds when high speed USB devices are connected.

Please note that the mainboard you might want to install should not be higher than about 4cm - including all parts and ventilation components. Higher mainboards might have physical contact with the harddisk-module above.

inter-tech SC-4100 mini server-chassis with 4-HDD backplane / mini ITX

Model:	SC-4100
Form factor:	mini ITX / 6.7" x 6.7" bzw. 170mm x 170mm
Drive-bays:	up to 4 x 3,5" HDD or alternatively 4 x 2,5" HDD/SSD in the hotswap-backplane on the front-side, further fixed internal installation possibility for one 2,5" HDD
Connectors:	front USB connector (2 x USB 3.0)
Cooling:	- incl. 80mm fan on the rear, optional 40mm fan in the front of the chassis
Power-supply:	none (please see installation options above), flex-ATX and 1U server power-supplies are possible
Dimensions:	(WxHxD): 200mm x 194 x 270mm
Color:	black
Notice:	mainboards intended for installation should not be higher than 4cm with all parts and ventilation components
More info:	- lockable front-cover - installation of a full-height expansion-card is possible - front switches and LED´s: power-switch, reset-switch, power-LED, alarm-LED, HDD-LED, 3 x LAN LED, 4 x HDD power/activity - material: 1.0mm steel