Top items
Items 1 - 10 of 57
Cost effective and compact 120W 12V external power supply from inter-tech. Ideal for use with mini ITX systems, industrial computers, laptop/notebook, TFT monitors and POS systems.
Universal mounting kit for fixed mounting of 19-inch enclosures to the rear (or middle) bar of a rack / server cabinet. Due to slotted openings, the mounting brackets can be overlapped very freely with various holes on the enclosure. Length: 30cm. When overlapping the brackets with two holes on the 19 inch case, approx. 10-15cm distance in depth between the back of the 19 inch case and the mounting point on the bar of the rack / server cabinet can be compensated. Suitable for 1U / 2U / 3U / 4U cases. Fixed mounting (no telescopic sliding rail).
A pair of very robust 18" universal telescopic slides - suitable for the installation of short 19" enclosures with 1U - 5U in server cabinets with internal depths of approximately 50cm - 65cm. The telescopic slides are suitable for the installation of most short 19-inch server chassis from our product-portfolio. We recommend the telescopic slides especially for the use with our short 19-inch chassis types with 38cm depth (e.g. IPC-C238, IPC-G238, IPC-E238, IPC-C338, IPC-G238, IPC-E238, IPC-G438).
19-inch IPC enclosure with a special height of 1.3U for use with ATX, micro ATX and mini ITX Mainboards. Due to the unusual height of 1.3 units, regular mainboard port-shields can be used to cover the ports on the rear. (in contrast to 1U chassis, where special port-shields have to be produced).
Very short (only 28,5cm long) 19-inch chassis with 1,5U for use with mini ITX motherboards. The case has two horizontal full-height expansion slots for easy installation of plug-in cards (e.g. dual slot graphics card) via optional riser card. Due to the exceptional height of 1.5U, standard mainboard port bezels can also be used at the rear.
This very short (only 28,5cm deep) 19 inch rack-mount chassis with 1.5U height supports the installation of mini ITX mainboards. The chassis is equipped with a SATA/SAS backplane on its front-side, supporting up to two 3,5" SATA/SAS harddisks. Due to the height of 1.5U, the chassis can be used with regular mainboard port-shields on its back-side.
This extremely short 1U rack-mount server case with a depth of only 25cm is compatible with mini ITX mainboards (7" x 7"). Base version without power-supply.
This extremely short 1U rack-mount server case with a depth of only 25cm is compatible with mini ITX mainboards (7" x 7").
This extremely short 1U rack-mount server case with a depth of only 25cm is compatible with mini ITX mainboards.
This extremely short 1U rack-mount server case with a depth of only 30cm is compatible with micro ATX (9,6" x 9,6") and mini ITX (6,7" x 6,7") mainboards.
Items 1 - 10 of 57