German
Top items
Items 1 - 10 of 47
Specialized and extremely short 4U rack-mount server case with frontside access to the mainboard-ports and a mounting-depth of 35,5cm. The installation of the mainboard is implemented with the mainboard rotated by 180 degrees compared to its usual position - with the mainboard ports directed to the front-side of the chassis.
This extremely short 1U rack-mount server case with a depth of only 25cm is compatible with mini ITX mainboards.
This very short (only 28,5cm deep) 19 inch rack-mount chassis with 1.5U height supports the installation of mini ITX mainboards. The chassis is equipped with a SATA/SAS backplane on its front-side, supporting up to two 3,5" SATA/SAS harddisks. Due to the height of 1.5U, the chassis can be used with regular mainboard port-shields on its back-side.
One pair of extremely robust 22" universal telescopic sliding-rails - suitable for the installation of 19 inch chassis with 1U - 5U in server cabinets with a mounting depth of approx. 60cm - 82.2cm. The telescopic slides are suitable for mounting most 1U, 2U, 3U, 4U and 5U server enclosures from our product portfolio. Due to the extremely robust construction and high load capacity, the telescopic slides can also be used with very heavy 4U/5U housings.
This extremely short and lockable 2U rack-mount server case with a length of only 38cm is ideal for use in short-length racks - like mobile flightcases or in narrow wall-mounted network-cabinets.
This extremely short 3U rack-mount server case with a depth of only 38cm is ideal for use in short-depth racks - like mobile flightcases or in narrow wall-mounted network-cabinets.
This extremely short 4U rack-mount server case with a depth of only 38cm is ideal for use in short-depth racks - like mobile flightcases or in narrow wall-mounted network-cabinets.
Der ausziehbare Fachboden mit einer Höhe von 2HE eignet sich für den Einbau in alle gängigen 19" Schränke und Racks.
Very short (only 37.6cm long) 19-inch IPC enclosure with 1U for use with micro ATX and mini ITX motherboards. In the basic version, the chassis is supplied without power supply.
19-inch IPC enclosure with a special height of 1.3U for use with ATX, micro ATX and mini ITX Mainboards. Due to the unusual height of 1.3 units, regular mainboard port-shields can be used to cover the ports on the rear. (in contrast to 1U chassis, where special port-shields have to be produced).
Items 1 - 10 of 47