German
Top items
Items 1 - 20 of 49
This extremely compact and flat SATA cable complies with the latest standards and has a data transfer rate of up to 6 Gb/s. Due to its slim design and high flexibility, we recommend this cable especially for installation in very compact servers and mini ITX enclosures. The cable is our internal reference class and is used often while building our complete server-systems.
This extremely compact and flat SATA cable complies with the latest standards and has a data transfer rate of up to 6 Gb/s. Due to its slim design and high flexibility, we recommend this cable especially for installation in very compact servers and mini ITX enclosures. The cable is our internal reference class and is used often while building our complete server-systems.
Metal fan-fixture for the installation of two 60mm fans in two standard 5 1/4 inch drive bays - including all necessary screws.
Front-panel with 2 x USB 3.0 ports, power-switch, reset-switch and three LED´s. Cable length: 70cm. For self-installation in exchange with the original USB 2.0 front-panel. Please consult the compatibility list below.
Universal mounting kit for fixed mounting of 19-inch enclosures to the rear (or middle) bar of a rack / server cabinet. Due to slotted openings, the mounting brackets can be overlapped very freely with various holes on the enclosure. Length: 30cm. When overlapping the brackets with two holes on the 19 inch case, approx. 10-15cm distance in depth between the back of the 19 inch case and the mounting point on the bar of the rack / server cabinet can be compensated. Suitable for 1U / 2U / 3U / 4U cases. Fixed mounting (no telescopic sliding rail).
Fan module with two 60mm Titan TFD-6020M12B fans for installation in two standard 5 1/4 inch drive bays - including all necessary screws.
2.5 inch removable frame for the installation of a SAS/SATA SSD or hard-disk in a free PCI / PCIe expansion slot (full height). The robust removable frame is ideal for expanding very compact housings with an additional HDD/SSD - e.g. in mini ITX systems or 19-inch servers with 1U.
Extremely sturdy and lockable 2.5 inch removable frame for the installation of a SAS/SATA SSD or hard-disk in a free PCI / PCIe expansion slot (full height). The robust removable frame is ideal for expanding very compact housings with an additional HDD/SSD - e.g. in mini ITX systems or 19-inch servers with 1U.
Special riser-card for operating a PCI Express x16 expansion-card in our compact 19-inch chassis type IPC-G225 and the Mini ITX chassis MINI-202B. Please note the maximum installation depth for expansion-cards of 175mm in the two compatible enclosures.
Fan module with two 60mm Blacknoise/Noiseblocker XR-2 silent fans for installation in two standard 5 1/4 inch drive bays - including all necessary screws.
A pair of very robust 18" universal telescopic slides - suitable for the installation of short 19" enclosures with 1U - 5U in server cabinets with internal depths of approximately 50cm - 65cm. The telescopic slides are suitable for the installation of most short 19-inch server chassis from our product-portfolio. We recommend the telescopic slides especially for the use with our short 19-inch chassis types with 38cm depth (e.g. IPC-C238, IPC-G238, IPC-E238, IPC-C338, IPC-G238, IPC-E238, IPC-G438).
Der ausziehbare Fachboden mit einer Höhe von 2HE eignet sich für den Einbau in alle gängigen 19" Schränke und Racks.
One pair of extremely robust 22" universal telescopic sliding-rails - suitable for the installation of 19 inch chassis with 1U - 5U in server cabinets with a mounting depth of approx. 60cm - 82.2cm. The telescopic slides are suitable for mounting most 1U, 2U, 3U, 4U and 5U server enclosures from our product portfolio. Due to the extremely robust construction and high load capacity, the telescopic slides can also be used with very heavy 4U/5U housings.
Very robust and lockable M.2 NVMe SSD removable frame for the installation of an NVMe SSD in a free PCIe expansion slot (from PCIe x4 up) with full or low height. The adapter supports the installation of NVMe SSDs with 30/42/60/80mm length (M.2 2230, 2242, 2260, 2280). The removable frame is compatible with PCIe 3.0/4.0 NVMe SSDs and is ideal for the uncomplicated expansion of systems with an additional NVMe SSD. A suitable slot bracket for converting the removable frame to a low-profile installation height is included.
Mini-backplane for the installation of up to four 2.5" SAS or SATA I/ II/III hard drives in one internal 5.25" drive bay.
Very short (only 28,5cm long) 19-inch chassis with 1,5U for use with mini ITX motherboards. The case has two horizontal full-height expansion slots for easy installation of plug-in cards (e.g. dual slot graphics card) via optional riser card. Due to the exceptional height of 1.5U, standard mainboard port bezels can also be used at the rear.
This extremely short 1U rack-mount server case with a depth of only 25cm is compatible with mini ITX mainboards.
This extremely short 1U rack-mount server case with a depth of only 30cm is compatible with micro ATX (9,6" x 9,6") and mini ITX (6,7" x 6,7") mainboards.
19-inch IPC enclosure with a special height of 1.3U for use with ATX, micro ATX and mini ITX Mainboards. Due to the unusual height of 1.3 units, regular mainboard port-shields can be used to cover the ports on the rear. (in contrast to 1U chassis, where special port-shields have to be produced).
Very short (only 37.6cm long) 19-inch IPC enclosure with 1U for use with micro ATX and mini ITX motherboards. In the basic version, the chassis is supplied without power supply.
Items 1 - 20 of 49