German
Top items
Items 1 - 20 of 54
Metal fan-fixture for the installation of two 60mm fans in two standard 5 1/4 inch drive bays - including all necessary screws.
Front-panel with 2 x USB 3.0 ports, power-switch, reset-switch and three LED´s. Cable length: 70cm. For self-installation in exchange with the original USB 2.0 front-panel. Please consult the compatibility list below.
High-quality 60mm case fan from Silverstone with PWM for use in server or industrial applications. This is a very good and powerful 60mm fan, which we also install in some of the complete systems we manufacture. The hydrodynamic bearing (HDB) of this fan also ensures a long service life. The 35cm long connection cable is directly connected to a short socket on the fan. Alternatively, with an included speed reduction cable, the fan can be operated in silent mode at only max. 2,850upm.
Universal mounting kit for fixed mounting of 19-inch enclosures to the rear (or middle) bar of a rack / server cabinet. Due to slotted openings, the mounting brackets can be overlapped very freely with various holes on the enclosure. Length: 30cm. When overlapping the brackets with two holes on the 19 inch case, approx. 10-15cm distance in depth between the back of the 19 inch case and the mounting point on the bar of the rack / server cabinet can be compensated. Suitable for 1U / 2U / 3U / 4U cases. Fixed mounting (no telescopic sliding rail).
Professional 80mm chassis turbofan from Silverstone with PWM for server or industrial use. This is one of the most powerful 80mm fans we could find on the market. The dual ball bearing of this fan also ensures a long service life. Please note the special installation depth of 38mm.
Fan module with two 60mm Titan TFD-6020M12B fans for installation in two standard 5 1/4 inch drive bays - including all necessary screws.
Special riser-card for operating a PCI Express x16 expansion-card in our compact 19-inch chassis type IPC-G225 and the Mini ITX chassis MINI-202B. Please note the maximum installation depth for expansion-cards of 175mm in the two compatible enclosures.
Fan module with two 60mm Blacknoise/Noiseblocker XR-2 silent fans for installation in two standard 5 1/4 inch drive bays - including all necessary screws.
A pair of very robust 18" universal telescopic slides - suitable for the installation of short 19" enclosures with 1U - 5U in server cabinets with internal depths of approximately 50cm - 65cm. The telescopic slides are suitable for the installation of most short 19-inch server chassis from our product-portfolio. We recommend the telescopic slides especially for the use with our short 19-inch chassis types with 38cm depth (e.g. IPC-C238, IPC-G238, IPC-E238, IPC-C338, IPC-G238, IPC-E238, IPC-G438).
Der ausziehbare Fachboden mit einer Höhe von 2HE eignet sich für den Einbau in alle gängigen 19" Schränke und Racks.
One pair of extremely robust 22" universal telescopic sliding-rails - suitable for the installation of 19 inch chassis with 1U - 5U in server cabinets with a mounting depth of approx. 60cm - 82.2cm. The telescopic slides are suitable for mounting most 1U, 2U, 3U, 4U and 5U server enclosures from our product portfolio. Due to the extremely robust construction and high load capacity, the telescopic slides can also be used with very heavy 4U/5U housings.
Dual Mini Backplane for the installation of two 2.5 inch SAS/SATA hard disks or SSDs in an internal 3.5 inch drive bay. The backplane is ideally suited for setting up a RAID-1 array in a small PC case (e.g. HTPC, Miniserver). The frame is completely made of robust metal and can accommodate HDDs and SSDs up to a maximum height of 9.5mm each.
Silverstone's high-quality black 350W Flex ATX power supply offers an 80PLUS Gold efficiency rating as well as a variety of common connectors and a 6pin PCIe connector, which is rather unusual in this power supply class. The power supply also has an on/off switch directly on the back of the power supply - which is also relatively rare for Flex ATX power supplies. The power supply is suitable for use in very narrow 19" server cases with 1U / 1U height or Flex-ATX compatible mini ITX cases.
Very short (only 28,5cm long) 19-inch chassis with 1,5U for use with mini ITX motherboards. The case has two horizontal full-height expansion slots for easy installation of plug-in cards (e.g. dual slot graphics card) via optional riser card. Due to the exceptional height of 1.5U, standard mainboard port bezels can also be used at the rear.
This extremely short 1U rack-mount server case with a depth of only 25cm is compatible with mini ITX mainboards.
High quality extended-ATX server tower chassis from Chenbro for professional applications. Basic chassis without power-supply or backplane. The case is suitable for operation with large server-mainboards (up to 12" x 13" / E-ATX), but can also be used with smaller standard mainboards (mini ITX, micro ATX, standard ATX).
This extremely short 1U rack-mount server case with a depth of only 30cm is compatible with micro ATX (9,6" x 9,6") and mini ITX (6,7" x 6,7") mainboards.
19-inch IPC enclosure with a special height of 1.3U for use with ATX, micro ATX and mini ITX Mainboards. Due to the unusual height of 1.3 units, regular mainboard port-shields can be used to cover the ports on the rear. (in contrast to 1U chassis, where special port-shields have to be produced).
Very short (only 37.6cm long) 19-inch IPC enclosure with 1U for use with micro ATX and mini ITX motherboards. In the basic version, the chassis is supplied without power supply.
The Micro-202B is an ultra-compact enclosure for mini servers and can be used as a wall-mounted enclosure, mini tower or desktop workstation. It offers space for a mini ITX motherboard and can be extended via the front-side 3.5 inch bay, e.g. with a mini backplane for up to two 2.5 inch HDD/SSD.
Items 1 - 20 of 54